Jon William Stables

Stable Specifications – Intro, Ideal & Elite Range

CONSTRUCTION

Free construction is carried out by our fully trained staff rather than sub-contractors within a 50-mile radius of our workshop in Netherstreet, Chippenham, Wiltshire. Please contact us for construction charges outside of this area.

All sections are bolted together.

Two heavy duty anchor brackets are fitted to the uprights of each 3.6m wall. These are then bolted to the base using mechanical fixings.

All fixings are fully galvanised.

DELIVERY

We are pleased to offer Free Delivery within a 50-mile radius of our workshop in Netherstreet, Chippenham, Wiltshire. Please contact us for delivery and charges outside of this area.

HEIGHT

Intro Range & Ideal Range To the eaves is 2135mm and to the ridge 2900mm, including the plinth

Elite Range To the eaves is 2480mm and to the ridge 3245mm, including the plinth.

TREATMENT

Our preferred method is high pressure – commonly known as Tanalised or
CCP. Non-toxic to animals.

FRAMEWORK

Intro Range & Ideal Range We use 75mm x 50mm tanalised, C16/C24 strength graded, planed timber @610mm centres.

Elite Range, We use 100mm x 50mm tanalised, C16/C24 strength graded, planed timber @ 610mm centres.

SHIPLAP CLADDING

We only use top quality 5th-grade Scandinavian redwood, fully tanalised for longevity against fungal decay & insect attack.

Ideal Range 16mm x 125mm

Elite Range 19mm x 150mm

ROOF COVERING

Our standard offering is black Onduline with a minimum 15-degree pitch.

Elite Range One sun reflective clear roof sheet fitted to all units, not including Tack Rooms.

Alternatively, you may want an attractive felt shingle roof. Add a touch of originality price on application.

ROOF LINING

Intro Range Roof lining can be fitted as an optional feature.

Ideal and Elite Range lined with 11mm OSB for additional strength and longevity. lined Onduline roof also provides a cooler environment in the summer and warmth in the winter months.

Roof Timbers/Purlins

Intro Range 100mm x 47mm C16/24 stress graded purlins @ 610mm centres.

Ideal Range & Elite Range 125mm x 47mm C16/24 stress graded purlins @ 610mm centres. Front/Gutter purlins 150mm x 50mm C16/24 stress graded.

CANOPY

Fully supported by a prefabricated plated truss.

Intro Range Extends to 900mm (3′) at the front.

Ideal and Elite Range Extends to 1200mm (4′) at the front.

GUTTERING

We use a half round black guttering and include the necessary down pipes.

Intro and Ideal Range Front only Rear guttering is also available.

Elite Range Front and Rear.

KICKBOARDS

All stables are lined to 1220mm high and include noggins to prevent objects dropping behind. As standard, we use OSB moisture resistant (Oriented Strand Board), manufactured to BS5669.

Intro Range 11mm All stables are lined to 1220mm high and include noggins to prevent objects dropping behind. As standard, we use OSB moisture resistant (Oriented Strand Board), manufactured to BS5669.

Ideal Range 18mm All stables are lined to 1220mm high and include noggins to prevent objects dropping behind. As standard, we use OSB moisture resistant (Oriented Strand Board), manufactured to BS5669.

Elite Range 18mm All stables are lined to eaves height. As standard, we use moisture resistant OSB (Oriented Strand Board), manufactured to BS5669. 

WINDOWS

Intro Range Hopper windows can be fitted as an optional feature.

Ideal Range Windows measure 600mm wide x 675mm high, The standard 4 blade Louvre window both are fitted with galvanised steel bars for safety. These increase airflow to your stable without causing a draught? making a more comfortable environment for your horse.

Elite Range Windows measure 745mm wide x 955mm high, The standard 6 blade Louvre window is fitted with galvanised steel bars for safety. Providing increased airflow to your stable without causing a draught? making life better for your horse.

STABLE DOORS

Intro Range Bottom doors are 1235mm wide with a height of 1220mm and 62mm thick. Bottom doors are lined with 11mm OSB BS5669 moisture resistant board & fitted with an anti-bite strip and kick over latch. All doors are hung with 450mm hinges fastened with 150mm Brenton pad bolts for additional strength. Held open and secured with a cabin hook. All doors extend to ground level. All ironwork is fully galvanised for protection against the elements. Top doors can be fitted as an optional feature.

Ideal Range Bottom doors are 1235mm wide with a height of 1220mm and 62mm thick. Bottom doors are lined with 11mm OSB BS5669 moisture resistant board & fitted with an anti-bite strip and kick over latch. Top and bottom doors are hung with Adjustable Hook & Band hinges fastened with 150mm Brenton pad bolts for additional strength. Held open and secured with a cabin hook. All doors extend to ground level. All ironwork is fully galvanised for protection against the elements. Top doors included.

Elite Range Doors are steel framed with 150mm x 38mm thick Iroko hardwood inserts 1220mm wide with a bottom door height of 1265mm and 40mm thick. Set in a steel door frame. Bottom doors are fitted with a kick over latch. All doors are hung with adjustable hinges fastened with 150mm Brenton pad bolts for additional strength, held open and secured with a cabin hook. All doors extend to ground level. All frames and ironwork are fully galvanised for protection against the elements. Top doors included.

TACK ROOM DOORS

Intro Range & Ideal Range
Tack room doors are 900mm wide 50mm thick. Hung with 450mm hinges (Ideal Range are adjustable) fastened with 150mm Brenton pad bolts, held open and secured with a cabin hook. All doors extend to ground level. All ironwork is fully galvanised for protection against the elements.

Elite Range Tack room doors are 900mm wide, steel framed with 150mm x 38mm Iroko hardwood inserts. Set in a steel door frame. All doors are hung with adjustable hinges and secured with a British Standard 5 lever mortice lock, held open and secured with a cabin hook. All frames and ironwork fully galvanised for protection against the elements.

VENTILATION

Intro Range Continuous ridge and eave vents.

Ideal Range & Elite Range Along side the continuous ridge vent we have created a unique arbour vent for our stables that is fitted under the overhang. Jon William Stables are market leaders for well-ventilated stabling. This makes the building not only better for your horse, but will make it last longer too.

RAINWATER SKIRT

Made from highly durable uPVC, our Rainwater Skirt is fitted behind the external cladding & overhangs the plinth. This prevents any water ingress.

DAMP PROOF COURSE

The DPC is fitted to the underside of all sole (bottom timber) plates.

FIXING TO BASE

Two heavy duty anchor brackets are fitted to the uprights of each 3.6m
wall. These are then bolted to the base using mechanical fixings.

 

← Return to the previous page

 

PLEASE NOTE: Timber sizes specified are sawn dimensions prior to machining. We reserve the right to alter our specifications without notice.

GET IN TOUCH

Planning Permission Enquiry

Please enter your details here and we will contact you to discuss your project. Alternatively, you can call us directly on 07984660046.

Enquiry Form

Google reCaptcha: Invalid site key.

Visit us at

Badminton Horse Trials logo